Peumatic Grouting pump is designed for strain and filling grouting of cement and bentonite slurries. It is primarily used for injecting (grouting) bar anchors and the drill holes so as to reinforce the loose rock mass. The most grain dimension cannot exceed zero.2 mm.
Grouting pump operation and maintenance is simple, protected and dependable. This pump is utilized in mines working beneath tough conditions as a result of it is dependable and explosion-proof.
Basic Pneumatic Grouting pump include: An air inlet, the pneumatic cylinder, mounting base frame and stand, pressure gauge, pumping cylinder, outlet with quick release coupling and wheels.
How it works
Pneumatic stress in the air cylinder exerts a high stress on the grout combination which results in ejection of grout with a excessive strain and velocity. The valves of the air cylinder within the pump operate automatically to actuate the cylinder. The pneumatic cylinder then moves the plunger up and down to complete the pumping cycle.
Pneumatic grout pump could be pushed even with out Electrical power provide in remote areas by using engine driven compressor.
The pump is majorly used in building and mining business for injecting material into wide and medium size hole in beams, columns ,basement walls and flooring, carry shaft concrete wall fill-up etc. In mining industry it is used to replenish cement solution the place there is a hole exists between construction and rock and for soil stabilization.
Detachable design tends to straightforward maintenance and transportation. Challenging works like Grouting in Bridges.
READ: How hydraulic submersible pumps work
This pump is broadly utilized in tunnels, coal mine, bridges and dams, constructing basis, and different underground initiatives, and inflammable, explosive sites and other unhealthy setting.
It has software in chemical trade additionally to pump out chemical slurries.
The pump is electrical energy free so, can be used at any web site condition whether or not it is rural or urban.
Mining Pneumatic Grouting pump has a larger discharge slurry adjustment vary. Generally the ultimate quantity of the grouting quantity is eight or10 instances of the amount at first. And the ultimate grouting quantity proves that filling is compacted.
Simply put; Pneumatic high-pressure grouting pump is specifically designed for high-pressure grouting. And it adopts full hydraulic drive, it’s pressure and move may be adjusted based on the necessities of grouting,(The flow of grouting pump is 0-100L/min, strain of discharge is 0-10MPa).besides, This Pneumatic high-pressure grouting pump can be used for grouting single or double fluid.
High-pressure grouting pump is principally used for highways, railways, water and electrical energy, development, mining etc. ground/underground construction.
Mining Pneumatic Grouting pump has some great benefits of low power consumption, small vibration, low noise, small dimension, excessive effectivity, reliable efficiency, stress and circulate control, long life and so forth. Common mine grouting pump has pneumatic injection pump, twin fluid injection pump, extrusion injection pump and piston injection pump.
Pneumatic grout pump can also be Light weight and with a wheelie design it may be carried simply. It is designed for easy operation and low maintenance. Last but not least its spare elements are easily available.