Peumatic Grouting pump is designed for stress and filling grouting of cement and bentonite slurries. It is primarily used for injecting (grouting) bar anchors and the drill holes so as to reinforce the free rock mass. The maximum grain dimension can not exceed 0.2 mm.
Grouting pump operation and upkeep is easy, secure and dependable. This pump is utilized in mines operating under tough situations because it is dependable and explosion-proof.
Basic Pneumatic Grouting pump embody: An air inlet, the pneumatic cylinder, mounting base body and stand, strain gauge, pumping cylinder, outlet with fast release coupling and wheels.
How it really works
Pneumatic strain within the air cylinder exerts a excessive pressure on the grout combination which finally ends up in ejection of grout with a excessive pressure and velocity. The valves of the air cylinder within the pump perform routinely to actuate the cylinder. The pneumatic cylinder then strikes the plunger up and down to complete the pumping cycle.
เกจวัดแรงดันเชื้อเพลิง may be pushed even with out Electrical power provide in remote areas by using engine pushed compressor.
The pump is majorly utilized in construction and mining industry for injecting materials into broad and medium dimension gap in beams, columns ,basement walls and flooring, carry shaft concrete wall fill-up and so on. In mining business it’s used to fill up cement resolution where there’s a hole exists between construction and rock and for soil stabilization.
Detachable design tends to easy maintenance and transportation. Challenging works like Grouting in Bridges.
READ: How hydraulic submersible pumps work
This pump is extensively used in tunnels, coal mine, bridges and dams, building basis, and different underground projects, and inflammable, explosive sites and other unhealthy surroundings.
It has software in chemical industry additionally to pump out chemical slurries.
The pump is electrical energy free so, can be used at any site situation whether or not it is rural or urban.
Mining Pneumatic Grouting pump has a bigger discharge slurry adjustment range. Generally the ultimate amount of the grouting volume is eight or10 instances of the amount at first. And the ultimate grouting quantity proves that filling is compacted.
Simply put; Pneumatic high-pressure grouting pump is specially designed for high-pressure grouting. And it adopts full hydraulic drive, it’s stress and circulate could be adjusted based on the necessities of grouting,(The circulate of grouting pump is 0-100L/min, pressure of discharge is 0-10MPa).besides, This Pneumatic high-pressure grouting pump can be utilized for grouting single or double fluid.
High-pressure grouting pump is principally used for highways, railways, water and electrical energy, building, mining etc. ground/underground building.
Mining Pneumatic Grouting pump has the benefits of low power consumption, small vibration, low noise, small dimension, excessive efficiency, reliable performance, stress and circulate management, lengthy life and so on. Common mine grouting pump has pneumatic injection pump, twin fluid injection pump, extrusion injection pump and piston injection pump.
Pneumatic grout pump can be Light weight and with a wheelie design it may be carried easily. It is designed for easy operation and low upkeep. Last but not least its spare elements are easily available.