THAILANDGAUGE LOGO.png

Compared to solenoid valves, ceramic ball valves offer improved longevity and put on resistance, and decrease prices. According to Anelia Hough, water treatment marketing consultant at Allmech, a leading South African producer of boilers and provider of water therapy parts, they’re perfect for water-saving techniques, industrial automatic control techniques, automatic sewage techniques, environmental protection projects, water provide and drainage, meals and water treatment, and irrigation systems.
Hough says that the proprietary 3-way Runxin valves that Allmech shares have confirmed particularly helpful in water treatment functions.
“Recently, certainly one of our customers put in a filtration plant to treat surface water coming from a nearby river,” she says. “Water turbidity was the main problem. Due to the standard of incoming water, the backwash cycle needed cleaned, filtered water. The goal on this software was to ensure the filter media beds were thoroughly cleaned during backwash cycles. During a backwash, the media should be adequately raised and combined to do away with contaminants. We put in a single L-shaped 3-way ceramic valve instead of two solenoid valves, switching or diverting the flow course of the incoming water between raw river water and filtered water. When multiple units want clean water diverted, there might be an exponential saving.”
In the service position, the 3-way valve allowed raw water from the river to be treated, however once the control valve position was changed again to start the backwash, the 3-way valve changed place to allow clear water for backwash cycle to enter the valve.
READ: Smart water meters remain a sustainable solution to the worldwide water crisis
Another Allmech customer operates a dairy manufacturing facility that operates 24/7. Part of the company’s operation is its boiler, which provides steam into the facility. A duplex water softener was put in with two softener control valves.
เกจวัดแรงดัน4นิ้วราคา have a operate to interlock valves in parallel system to have one valve in regeneration, but the different valve is in service,” says Hough. “Allmech installed a 3-way valve to vary the water circulate from standby unit to the service unit within seconds. The objective on this utility was to make sure soft water can be provided 24/7 to the boiler. Because the system ensured that one valve was regenerating while the opposite was in service, the customer only required one brine tank, which resulted in further value savings.”
Runxin’s ceramic ball valves offers several design features to enhance performance compared to ball valves made from conventional materials, the largest of which is the longevity of the parts. The valves are hermetically-sealed, so they have extremely excessive resistance to corrosion, abrasion, and chemicals, to stand up to the hardest water remedy challenges. The ball cores and seats are exactly ground in pair to make sure zero leakage. Each of the plastic options comes with a choice of connection between metric female thread and uPVC Glue and a few of the valves are available in several grades of steel.
Share