Around the world Trident Emergency Products specializes and provides our GP-Series high-quality foam pumps and foam system elements. We have the perfect combination of commercial firefighting purposes for both mobile fireplace equipment and fixed installations. Trident presents supply on foam pumps in lower than seven days from our in-stock inventory for each new installations and emergency foam pump replacements.
Our GP-Series foam pumps are of all bronze and stainless-steel construction, include a run-dry feature with separate timing gears and oil lubrication (no grease fittings), mechanical seals (no lip seals), and four life-time sealed bearings. Foam pumps are available from a hundred and fifteen LPM to 1,890 LPM ranging up to 20 BAR. UL® listed foam pumps can be found from one hundred fifteen to 750 LPM with reduction valves as commonplace. The GP500 foam pump has unmatched performance within the fireplace trade – good for foam tanker and foam transfer installations. PTO, electrical, hydraulic and engine-driven with motor mounts are additionally available.
Foam pump skid models are actually out there with both electric motor or diesel engine drives in various combinations with optionally available electronic controllers. These models are engineered for every customer’s requirements and performance.
Building your own system
Trident now offers the FOAMATE™ BP Series Product Line. It is made up of elements required to construct a Balanced Pressure Foam System which complement our GP-Series Foam Pumps. Utilizing mechanical and performance knowledge offered by the truck builder, our group can configure a gaggle of products that will permit for a cost-effective and easy-to-operate system with handbook controls for your fireplace suppression wants requiring a foam resolution.
These products can be configured to work with all kinds of engine, transmission, fireplace pump, foam pump and drive sort mixtures.
Foam Solution circulate rates vary from 2,000 LPM by way of 13,000 LPM and are suitable with any Class B foam concentrate.
A typical set up would include a GP-Series foam pump along with ratio controllers, balancing valve, metering valve, heat exchanger, ball valves, verify valve and duplex gauge.
Ratio Controllers are sized at 50mm / 750 LPM Flow, 65mm / 1200 LPM Flow, 75mm / 2350 LPM Flow, 100mm / 1600 LPM Flow, 150mm / 13000 LPM Flow. เกจวัดแรงดันอาร์กอน piping connections are Victaulic™ for ease of set up.
Trident also provides Around The Pump Foam Proportioners within the following sizes:
FOAMATE™ ATP 1.zero: Class A up to 1500 LPM
FOAMATE™ ATP 1.5: Class A as a lot as 4000 LPM
FOAMATE™ ATP 1.5: Class B as a lot as 4000 LPM
FOAMATE™ ATP 1.5: Class A/B Combo System
FOAMATE™ ATP 2.1: Class B as a lot as 8000 LPM
All Trident products carry a full five-year warranty to the unique purchaser.
For extra info, go to sales@tridentdirect.com
Share